Avanti-1 196 – 1,284 ft. lbs.
Avanti-3 468 – 3,120 ft. lbs.
Avanti-5 766 – 5,095 ft. lbs.
Avanti-8 1,150 – 7,760 ft. lbs.
Avanti-10 1,478 – 10,075 ft. lbs.
Avanti-20 2,805 – 19,322 ft. lbs.
Avanti-35 4,955 – 34,060 ft. lbs.
Avanti-50 7,462 – 49,750 ft. lbs.

As a replacement and upgrade to the Hytorc MXT, the new Avanti is the Only Torque & Tension Machine that comes with a 360 Degree Adjustable Rear Reaction Arm or a 360 degree Coaxial Reaction Arm.

This tool is also upgradable for use with Hytorc’s Load Disc Torque/Tension and ClampNut Tensioning accessories.

Re-engineered Compact & Superlight Weight Design Provides a more Durability and Safety.

STEALTH

Twin-speed, automatic, limited-clearance Bolting

Stealth 2 293 – 2,001 ft. lbs.
Stealth 4 604 – 4,020 ft. lbs.
Stealth 8 1,199 – 7,984 ft. lbs.
Stealth 14 2,105 – 14,255 ft. lbs.
Stealth 22 3,250 – 21,680 ft. lbs.
Stealth 36 5,110 – 34,800 ft. lbs.

Click in the pin and screw-free cassette for your size nut. obtain access where no other tool fits. Holding the Hytorc-disc stationary while turning the nut, torques bolts literally in seconds.

The Hytorc-Stealth slim design is patented. Its all application safe fit, its lightweight and its high speed make it the most desirable Maintenance and Production tool for all bolts, including Allen bolts.
MXT

The industry standard for the last 15 years!

1-MXT 200 – 1,390 ft. lbs.
3-MXT 480 – 3,230 ft. lbs.
5-MXT 835 – 5,590 ft. lbs.
10-MXT 1,775 – 11,520 ft. lbs.
35-MXT 5,235 – 34,900 ft. lbs.

The HYTORC MXT Series, Square-Drive Wrench is the only true Uni-Body Tool in the world. Its patented, single-piece housing is the safest and most torsion-resistant structure money can buy. Its durability in use is unquestionably the best. Its job-adjustability is engineered to be the greatest: a 60 point, 360 degree reaction.

Although most consider this tool “bullet-proof” we were able to make some improvements in versatility and expandability by developing the new Avanti Dual which is the successor to the MXT.

Major advantages:

• Exclusive low profile patented 360×180 degree hose Uni-swivel allows for easy fit in confined areas and eliminates hose kinking.
• System Accuracy of ± 3% as a result of built-in Torsion-Retainer and guaranteed stroke of not more than 24 degrees.
• Sure-lock/Easy Release Reaction Arm Retainer
• Quick Release Levers for accurate Pawl Release
• Recessed Ratchet Shield
• 3/4″ to 2-1/2″ Square Drive, 1,000 ft.lbs to 50,000 ft.lbs
• Lightest and smallest in the world
• Unbeaten durability
• Unbeaten accuracy

XLCT

2-XLCT 255 – 1,720 ft. lbs.
4-XLCT 595 – 3,970 ft. lbs.
8-XLCT 1,155 – 7700 ft. lbs.
14-XLCT 2,010 – 13,400 ft. lbs.
18-XLCT 2,675 – 17,845 ft. lbs.
30-XLCT 4,500 – 31,800 ft. lbs.
45-XLCT 6,750 – 45,000 ft. lbs.

Although we still manufacture this tool to support our current customers, the XLCT has been replaced in our product line with the Hytorc Stealth Narrow Clearance Wrench.

The world’s largest selling Limited Clearance Cassette Tool.

HYTORC’s patented In-Line Reactor permits the use of drive extensions, something no other hydraulic wrench is capable of.

HYTORC-XLCT provides continuous turning speed and precise power delivery to the nut in all applications.

HYTORC-XLCT is equipped with a 360×360 degree Uni-Swivel so there is literally no hose kinking and the tool can be applied even in the most confined areas.

Give us any flange or casing and watch the HYTORC features benefit you.

Major advantages:

• Universal fit (low height, small radii)
• Torsion Resistant Housing
• Quick Change Ratchet Links (screwless, Pin-Type Cassette Exchange)
• Contour In-Line Reaction (Torsion-Free Operation)
• Slim Link Design (High Neck area for Corner Fit)
• Convertible (Hex, 12-point, Castle-Nut Sockets)
• Quick-Torq Lever Design (Rapid Cycle)

NOTHING IS CLOSE!

Our 6th generation limited-clearance Tool.
What started with a 3-moving part tool, ended up to be the fastest, most powerful universal Torque Machine in the World! A Torque Machine that doesn’t pre-stall, doesn’t hang through and gets the desired torque on the nut, no matter what. Add to it the variety of job-related accessories and you have the only tool you will ever need.

THE EDGE

The most economical, field-proven “3 MOVING PART” Hydraulic Torque Wrench in the world.

When bolting speed is imperative, simplicity in use, light weight, small size and built-in durability become a must.

The EDGE’S field-proven mechanism has been perfected over the years. The best alloys available combined with safety-oriented engineering and precision machining, make the EDGE-Wrench the one others are compared to for safety, simplicity, accuracy and quality. With 75% fewer parts, sturdy Uni-body Design and Anti-Lock Pawl System, this is the economical solution to your bolting needs.

Major advantages:

• 360 degree Uni-swivel and 60 point, 360 degree Reaction Arm.
• Exclusive Precision-tooth Ratchet for accuracy.
• One-piece, bind-free push-through drive.
• Exclusive Radius, Throat and Head Contour for fit.
• Long Stroke Design with Anti-lock feature.
• Hands-free operation for safety.

Technical Data

Hydraulic Power Packs
QAS 115
Hytorc115
JetPro

HYTORC developed the jet series pumps which are portable, heavy duty, light weight, high flow to withstand the harsh environments of maintenance and meet endurance requirement of production.

These air or electric driven Hydraulic Pumps are engineered for continuous, non-stop use in harsh environments. If used on Torque Tools, Jacks, Cutters, Presses or Bending equipment, their reliability is unmatched by any other Hydraulic Power Pack.

Up to 4 tools can be operated simultaneously due to the high flow of these light-weight pumps. These fully remote-controlled units come ready-to-use.

Major Advandages:

• Designed for one-to-four tool use
• New low-profile maintenance-free directional control valve
• Precision pressure regulator
• Universality for all Single or Double Acting Cylinders
• Oil sight/Temperature gauge and drain plug on reservoir
• Portable 2 gallon Reservoir with Centre Lift Handle
• Remote Control with Safety Button
• Portable, durable and precise

Placing the LOADISC™ underneath a regular nut turns regular nuts into cost-efficient speed fasteners, bolted connections into reliable, leak-free joints, bolting hazards into safety, tool failure into reliability.

Placing the LOADISC™ underneath a regular nut turns regular nuts into cost-efficient speed fasteners, bolted connections into reliable, leak-free joints, bolting hazards into safety, tool failure into reliability.

DISC and hex nut are of the same material and A/F size as regular nut.

Put the economical LOADISC™ on all Joints! LOCK on Tools. LOAD up bolts hands-free, torsion free with pure stretch!

The inexpensive HYTORC LOADISC™ has three purposes:

1. to stop the bolt from turning and twisting while the nut is being turned.
2. to allow locking the tool on the DISC for hands-free operation even on inverted applications.
3. to make torque faster and more precise.

The Result:

• Torque is torsion-, side load- and joint rotation-free without reaction arms and backup wrenches.
• Bolt Stretching is free of unknown transfer relaxation . No over-stretch. No slamming the nut face on to the joint face during load transfer. No risk of inadvertent yield stretching during loosening.
• With the known bearing face friction of the nut, Torque becomes more predictable and even.
• A single tool to make Torque and Tension as we know it – Profitable.

To assemble and disassemble flanges…

…Nothing is as quick as the HYTORC CLAMP

… Nothing is as precise as the HYTORC CLAMP

… Nothing protects your Stud and flange better than the HYTORC CLAMP

HYTORC has introduced The FLIP, a newly patented pneumatic torque tool that is small, handy, light-weight, fast and torque-accurate.

With one hand on the pistol grip and the other on the run-down handle, pre-torque of fasteners for parallel joint closure is accomplished in a zip with up to 1,800 rpm.

Once the flange is pre-torqued, a flip of the wrist turns the run-down handle into a reaction arm and high-speed into high precision torque for a quick and vibration free, precision-assembly of all joints.

The FLIP is available in 4 sizes for a torque range between 200 and 5,400 ft.lbs. and drive/shaft sizes from 3/4″ to 1-1/2″.

Its target market is the industrial market of impact wrenches, the only wrench that up to now provided the speed to get back on line ahead of time.

Dual-speed torque tools, from a safety point of view, are limited to not more than 100 rpm to avoid injury with swinging reaction arms. The Flip safe at 1,400 to 1,800 rpm for parallel joint closure at high speed with a planetary gear system for predetermined torque.

The FLIP has an aluminum motor housing and pistol grip.

Benefits Include

• No-switch, one tool for safe high-speed run-down and precision torque make-up
• Time reduction of at least 50%
• Tennis-elbow- and vibration-free make-up and break-out
• Precision torque within 5%
• 1 Year, No-Questions asked Warranty