HYTORC WASHER™

HYTORC WASHER™

Lock & Load is about…
Hands-free, Precision, Speed Torquing of all Bolts in Seconds,

Placing the LOADISC™ underneath a regular nut turns regular nuts into cost-efficient speed fasteners, bolted connections into reliable, leak-free joints, bolting hazards into safety, tool failure into reliability.

without the Hassle of…

  • reaction arms, backup wrenches
  • pullers, bridges, tommy bars
  • jackscrews, impact- and hand wrenches
without the Nuisance of…

  • torsion, side load, over-stretching, over-relaxing
  • tool holding
  • manual screw- or nut-turning
without the Danger of…

  • pinching fingers
  • being close to high powered tools
without the Cost of…

  • two sets of tooling, for torque and tension
  • longer bolts
  • tons of accessories
  • tool repair due to internal torsions

Placing the LOADISC™ underneath a regular nut turns regular nuts into cost-efficient speed fasteners, bolted connections into reliable, leak-free joints, bolting hazards into safety, tool failure into reliability.

DISC and hex nut are of the same material and A/F size as regular nut.

Put the economical LOADISC™ on all Joints! LOCK on Tools. LOAD up bolts hands-free, torsion free with pure stretch!

The inexpensive HYTORC LOADISC™ has three purposes:

  1. to stop the bolt from turning and twisting while the nut is being turned.
  2. to allow locking the tool on the DISC for hands-free operation even on inverted applications.
  3. to make torque faster and more precise.

The Result:

  • Torque is torsion-, side load- and joint rotation-free without reaction arms and backup wrenches.
  • Bolt Stretching is free of unknown transfer relaxation . No over-stretch. No slamming the nut face on to the joint face during load transfer. No risk of inadvertent yield stretching during loosening.
  • With the known bearing face friction of the nut, Torque becomes more predictable and even.
  • A single tool to make Torque and Tension as we know it – Profitable.
translation telephone

Filed under: All Products

Comments are closed.